Wall panelling can entirely transform a staircase. Adding panelling at an angle is admittedly not the easiest task but, in this article, we’ve broken how to panel stairs down in eight manageable steps.
Wondering if it’s worth the effort? In our opinion, yes! As you’ll likely be walking up and down the staircase multiple times a day, every day, the area may as well look pretty!
Here’s how to get started…
How to do wall panelling on stairs
1) Get the correct equipment
Often, with wall panelling, you can get all the panels and skirting boards cut-to-size which makes projects super straightforward. However, given the angles involved in staircase panelling, you’ll need to cut the sheets and boards to fit up the walls. So, before getting started, make sure you have the right tools.
The first part to think about is the skirting board. Here are the tools you’ll usually need to cut the skirting:
- Sliding mitre saw for the angled ends
- Coping saw for internal corners
- Jigsaw for cutting the sloped or stepped line
To minimise chipping, it’s best to use a fine-tooth blade.
And to cut the panelling, here’s a guideline of what you’ll need:
- Circular saw to cut down MDF sheets
- Mitre saw for things like narrow strips and mouldings
- Jigsaw for tight cut outs (such as around switches)
- Clamps to hold the panelling in place while cutting it
Make sure you have all the things for marking up and measuring such as a spirit level, tape measure and pencil. Plus, for installation, it’s also a good idea to get adhesive (to attach the panels to the wall), filler and caulk.
Please note: When cutting MDF, make sure you’re working in a well-ventilated area, and use respiratory PPE. Look for respiratory masks with P3 filters.
2) Install the skirting board before you panel stairs
Using the tools mentioned above, you can either install the skirting with a sloping edge running up along the stairs, or with a stepped edge. As it’s one continuous live, a sloping edge is the quicker and easier of the two options.
Given the challenging angles, this is a difficult step of panelling staircases. So, if you’re not confident to do it yourself, it’s a good idea to hire a professional to do the skirting board.
3) Mark where the panelling with go
Once your skirting board is in place, carefully mark out where you want your panelling to go along the staircase. For half-wall panelling, especially, you’ll need to be sure to keep an even height along the wall.
Using a spirit level, check the measurement lines from the skirting to the top of the panelling are completely vertical. This will ensure the panelling exactly parallel all the way up.
4) Order your wall panels
Although you’ll need to cut the panelling to the required angles, the closer you can get the panels to the correct size, the less that’ll get wasted. As such, it’s still worth trying to get your panels made-to-measure if possible.
With our bespoke panelling options, simply input your required height and width in millimetres and receive your panels cut-to-size. For example, the 2440mm x 600mm tongue and groove panelling can be cut to a height of your choice.
5) Cut down the panelling
As mentioned, to get the panelling to fit the correct angles, you’ll need to precisely cut the edges.
Measure (then measure again!) so you know exactly where to cut. It’s a good idea to score the sheets with a safety knife first, so you have a really clear guideline for where to saw. Again, make sure you’re working in a well-ventilated area, and wear a respiratory mask.
6) Install the wall panels
Now for the fun bit. Hi-strength adhesive is generally the easiest way to attach MDF panelling to a wall, but you can use nails or screws if you prefer.
As long as everything was measured correctly, it should be an easy job to line up the panels in the correct place along the staircase.
If there are any holes or gaps, use decorators caulk to fill them in, then sand off any excess for a smooth finish.
7) Add a dado or hand rail
To complete the look, it’s worth adding a dado and/or hand rail along the top of the panelling. As well as the practical benefits of a rail, it creates a lovely finish to the panels.
Dado rails, especially, add gorgeous detailing to a staircase. To compare options, shop our full range of dado rails.
8) Paint your stair panelling
The joy of MDF is that it has a smooth, even texture that is ideal for painting.
We sell a lot of primed panelling, meaning it arrives ready to paint. But, if you buy unprimed panels, make sure you prime them before painting. Otherwise, the MDF will likely absorb too much of the paint.
Once primed, paint the panelling in the colour of your choice. Whether you’re going for bold, deep colours for a cosy feel, or brighter shades to create a light and airy feel, your stair panelling will be ready!
Ready to get started? Head over to our range of wall panelling kits. Or, for more inspiration, check out our Instagram.